IRIS POWER
QUALITROL
SNAP360

Epoxy Mica Capacitors (EMC Sensor) – Partial Discharge Monitoring

80pF Sensors for Onlilne Monitoring of Partial Discharge

Product Overview

Iris Power Epoxy Mica Capacitors are sensors for monitoring Partial Discharge Across Motors, Generators, Switchgear, Dry Type Transformers and Isolated Phase Bus

Download Brochure Download Brochure - Switchgear
Works with the Following Assets
Assists with the Following Type of Monitoring

Iris Power Epoxy Mica Capacitors (EMC) are designed to detect Partial Discharge activity in motors, generators, switchgear and isolated phase bus while not imposing on the machine’s operation or reliability in any way.

Iris Power’s 80 pF EMCs are designed to block the 50/60 Hz power frequency and allow only high frequency (>40MHz) signals to pass through, be collected and analyzed by an appropriate Iris Power portable instrument or continuous monitor.

 

 

Product Details

Features

  • Lifetime warranty from manufacturers defects on the epoxy mica capacitors
  • Voltage endurance tested to >1000 hours at 30 kVrms (16 kV EMC)
  • Capacitance rating: 80 pF +/- 4 pF
  • PDEV Sensitivity: 1 pC (ASTM D1868 and IEC 60270)
  • Bandwidth into 50 ohms: (3dB): 40 MHz to 500 MHz
  • Operating temperature range: -50 °C to +130 °C (-58 °F to +266 °F)
  • Calculated 60,000 year life (tested to IEEE 930-1987)
  • Inclined Plane Tracking Test (ASTM D2303-85): 300 min
  • Comparative Tracking Index (IEC 60112): 600 min
  • Meets ANSI C37.20.2
  • Meets all the reliability requirements in IEC TS 60034-27-2 and IEEE 1434 for PD sensors

Options

  • Five different voltage rated EMCs are available – 6.9 kV, 16 kV, 25 kV, 28 kV and 35 kV
  • EMC kits with installation material according to IEEE 323-1983 for nuclear power generating stations are available

Get a Quote

Call us at +1 905.677.4824 or Toll Free at +1 888-873-4747 or fill out our online quote form below.

Learning Center

This Resource Library is designed to provide current, relevant resources that provide technical knowledge and practical solutions for owners and operators of rotating machines. We encourage you to use the search feature and filters to locate specific resources of interest.

RESOURCE LIBRARY

Articles, Technical Papers, & Case Studies

Stator End-Winding Vibration in Two-Pole Machines – Avoiding Generator Failure

IN THE PAST 15 YEARS, INSURANCE INDUSTRY DATA HAVE indicated that stator end-winding vibration has become the most important ...

BROWSE OUR RESOURCE LIBRARY

COURSES & TRAINING

Hands-on, practical experience

EL CID Training | Electromagnetic Core Imperfection Detection – October 1-3, 2024 – Iris Power, Toronto, Canada

Reasons to Take The Course Mechanical, electrical and environmental stresses can cause a breakdown in the inter-laminar insulation on Stator Core…

BROWSE OUR COURSES

IRMC 2024 June 17-20, 2024 - Renaissance Las Vegas, Las Vegas NV

IRMC 2024
LEARN MORE

Looking for more Information

Sign up to receive our latest whitepapers, webinars, new product information, product updates and more.

About Iris Power

Iris Power, founded in 1990, offers sensors, monitors and diagnostic solutions for the assessment of the actual state of generators, motors, dry-type transformers and air-insulated switchgear, so that the risk assessed and the necessary maintenance can be planned. In 2010 Iris Power LP was acquired by Qualitrol Corporation, a global leader for condition-based monitoring.

Head Office

IRIS Power LP
3110 American Drive
Mississauga, Ontario
L4V 1T2 CANADA

Telephone: +1-905-677-4824
Toll Free: +1-888-873-4747

Contact Us

Copyright © 2017 IRIS POWER

SITE BY: SNAP360